The function of a snow fence is to prevent snow from falling uncontrollably from the roof that can injure people and damage property underneath or around your roof, and it serves as an anchor point for personal protection equipment. It also serves as foot support when working near the roof foot or roof break.
Upon the installation of a snow stopper and/or snow fence, it is of the utmost importance to adapt the amount to the actual geographic location, amount of precipitation and the design of the roof. Remember that so-called snow pockets can form. This is where more snow ends up and then an extra snow fence or snow stopper is needed to keep the snow in place.
When there is a risk of overloading the snow fence and the roof, the roof must be shovelled in order to prevent damages to the roof, as well as accidents.
The snow fence satisfies SS 831335.
The obvious choice when the professional gets to decide!
The snow fence for profiled sheet metal from CW Lundberg is the most cost effective choice in snow fences. They are the lightest on the market, easy to install and easy to extend to the needed length.
The snow fence is installed with a locking system, at each outer end. The same locking system also fits the 3-tube snow fence.
The product is installed onto brackets that are attached to the roof. The bracket is used for a number of functions, such as walkways, ridge and roof foot rails, snow fences and guardrails for roof hatches.
Use together with a mounting plate
European patent
The mounting plate is used for the attachment to the sealing surface on asphalt and artificial material-based waterproofing membranes with roof underlays of tongue-in-groove board, min 17 mm. No damage is done to the waterproofing membrane.
The mounting plate is specially developed for shingle roofs and is combined with brackets for smooth roofs. Installed under the waterproofing membrane. It may be a good idea to plan the roof safety measures before applying the sealing surface.